Smooth surface, high level of detail and bright saturated color.
The maximum dimensions of the model are determined by the size of the camera of a printer that is used for printing.
Make sure that your model fits the specified dimensions. You can reduce the overall size of the model by scaling it, removing protruding parts or making a collapsible model.
The minimum dimensions of the model are determined by the technological features of the painting of a model.
Make sure that your model fits the specified dimensions. You can increase the overall size of the model by changing the scale, combining or increasing the fragements or try to use material with a lower minimum size.
If the model contains hollow spaces they will be filled with the support material while printing. To clean the product of support material it is necessary to provide holes. In the case of large cavities, it is recommended to make several holes in the construction.
It is necessary to provide sufficient distance for painting between parts of the model.
The photopolymer is printed using patented technology, which is based on the principle of layering model of photopolymer material, cured by UV radiation. The minimum thickness of the layer is about 16 microns. The material is applied using ink-jet head, and then the layer is exposed to light with a UV lamp. In the printing process support material is used, which, after completion of the production can be easily removed with water.