Exclusive material allows creating photorealistic items.
MATERIALS FOR 3D printing
Multicolor
Strength: 2
Detail: 4
Smoothness: 3
Guide for designer
Max model size:
380×250×200 mm
The maximum dimensions of the model are determined by the size of the camera of a printer that is used for printing.
Make sure that your model fits the specified dimensions. You can reduce the overall size of the model by scaling it, removing protruding parts or making a collapsible model.
Min model size:
10×10×10 mm
The minimum dimensions of the model are determined by printing quality of a printer.
Make sure that your model fits the specified dimensions. You can increase the overall size of the model by changing the scale, combining or increasing the fragements or try to use material with a lower minimum size.
Min wall thickness
2 mm
Min supported wires
2 mm
Min unsupported wall thickness
2 mm
Min embossed detail
0,8 мм
Min escape holes
15 mm
If the model contains hollow spaces they will be filled with the support material while printing. To clean the product of support material it is necessary to provide holes. In the case of large cavities, it is recommended to make several holes in the construction.
Min clearance
1 mm
If the model contains several functional parts, it is necessary to provide sufficient distance between them, otherwise, in the process of printing parts will be merged.
Material properties
- 1. 16.7 million colors, the resolution is 600 x 540 dpi
- 2. Heat resistance up to 60 ° C
- 3. Low strength, increases after an additional treatment
- 4. Afraid of water. Solution - impregnation with special substances
Printing technology
Inkjet printing technology Z Corp is used to create models. The printer creates the model layer by layer. Colouring of material is realized by combining a number of different, previously dyed adhesives in accordance with a predetermined color. In order to increase the strength of the model, after completion of the printing process it is placed in a special adhesive solution. In order to prevent discoloration, the model is further treated.
Additional information
- 1. Products are able to withstand the heat load of up to 60 ° C, at higher temperatures significant changes and material deformation model may occur.
- 2. The printer transmits about 16.7 million colors and shades, the print resolution is 600 × 540 dpi.
- 3. The model should not be exposed to water.
- 4. Fragility of the material persists even after further treatment process.