White or colored sturdy material, has good flexibility.
The maximum dimensions of the model are determined by the size of the camera of a printer that is used for printing.
Make sure that your model fits the specified dimensions. You can reduce the overall size of the model by scaling it, removing protruding parts or making a collapsible model.
The minimum dimensions of the model are determined by printing quality of a printer.
Make sure that your model fits the specified dimensions. You can increase the overall size of the model by changing the scale, combining or increasing the fragements or try to use material with a lower minimum size.
If the model contains hollow spaces they will be filled with powder while printing. To clean the product of excess material it is necessary to provide holes. In the case of large cavities, it is recommended to make several holes in the construction.
If the model contains several functional parts, it is necessary to provide sufficient distance between them, otherwise, the powder may fill the gaps, or in the process of printing parts will be merged.
Models are made from white well-granulated powder. Print technology used is layered laser sintering. The layer thickness is 0.1 mm. In some cases, the "effect of the stairs" can be seen on models. The intensity of this effect depends on position of a model on the printing table during production.
Our experts will try to orient the model optimally to maximize flat and smooth surface and an attractive appearance.