1. The Parties. Terms. Governing law.

1.1. This agreement is entered into by and between Limited liability company PROTOTYPSTER, registered office at: Novosibirsk, ul. Inzhenernaya, 20, hereinafter referred to as the «Service» and legal entity or inpidual (as the case may be) registered on the website at www.prototypster.ru (the «Website»), and loading onto the said Website a certain file with information about a three dimensional model that is required to reproduce the model using three dimensional copying techniques (the «Layout»). Hereinafter such inpidual or entity is referred to as the «User».

1.2. Terms and definitions

Public offer/Offer — shall mean the text of this document, including all annexes, changes and amendments hereto, displayed on the Service's Website and available on Internet at: www.prototypster.ru.

The scope of work is as follows:
а) production of Models based on the Layouts provided by the User;
b) production of Models based on the Layouts available on the Service's Website;
c) other work and/or services specified in paragraphs a and b of this subclause or those of a preparatory nature.

Personal Page — shall mean the personal page of the Website made available to the User upon registration and/or authorization on the Website. Personal Page is intended to store personal information of the User, to place Orders, to view statistical information about Orders placed and their status and current status of the Personal Account, and to receive notices.

Personal Account — shall mean information about the funds deposited by the User and debited under the Agreements in payment for the Work performed under the Agreements. Access to the Personal Account is provided to the User via the User's Personal Page.

Model — shall mean the output of the Work performed by the Service based on the Layout.

1.3. This agreement is governed by the substantive law of Russia in effect as at the date of acceptance.

1.4. This instrument is deemed to have the same effect as a hard copy document and is signed by the User using a simple electronic signature that has the same validity and effect as the User's handwritten signature. The parties agree to keep their signature keys confidential.

2. Subject of the Agreement

2.1. Whenever the User performs operations permitted by the functionality of the Website to load the Layout onto the Website for it to be displayed, the Service undertakes to provide technical means to enable the loading which is understood to result in the Layout being displayed on the Website in a dedicated section.

2.2. Where technically possible, the Service shall perform the Work against the Orders placed, and the User shall accept and pay the Work on the terms set out in this Offer.

2.3. The description and scope of Work, timeframe and cost shall be determined by reference to the information and materials provided by the User when placing the Order.

2.4. A mandatory prerequisite for performance of the Work by the Service shall be unconditional acceptance of and compliance by the User with the requirements and provisions governing the relationship between the parties hereunder that are set out in the following documents:
1) Rates applied by the Service to calculate the cost of Work at the date of the Order, including the information on the cost of: materials and work involved in the manufacture, packaging, storage and transportation of the Model.
2) Operating technical regulations (hereinafter, the «Regulations») displayed on the Internet at http://prototypster.ru/terms/ (Terms and Conditions section of the Website) and setting out: а) Order placement procedure;
b) Layout specifications (including file format);
c) sequence of work and timeline;
d) conditions of submission of Work deliverables.

3. Rights and obligations of the Parties

3.1. The Service undertakes to perform the Work in full compliance with the Agreement and timely inform the User of the progress and completion of the Work.

3.2. The Service undertakes to submit the Work deliverables to the User in the agreed manner and to the agreed deadline.

3.3.The Service has the right to suspend the Work if the User fails to meet the requirements set out in this Agreement.

3.4. The Service has the right without prior notice to the User, to unilaterally change the Rates and Regulations for Work for which no Order has been placed.

3.5. The User undertakes to check the Layout prior to the beginning of the Work and accept the Work deliverables in the agreed manner and to the agreed deadline.

3.6. The User undertakes to provide reliable personal information, including the name and contact details. If the User fails to provide reliable personal information at the time of registration, the User should provide it by way of amending the initial registration details.

3.7. The User undertakes to provide reliable personal information, including the name and contact details. If the User fails to provide reliable personal information at the time of registration, the User should provide it by way of amending the initial registration details.

4. The cost of Work and terms of payment

4.1. The cost of Work under the Agreement shall be determined based on the Service's Rates applicable as of the date of placing the Order. The cost of Work includes the cost of materials and work involved in the manufacture, packaging, storage and transportation of the Model, as well as fiscal charges.

4.2. The User shall pay for the Work by way of a 100% advance payment transferred to the Service's settlement account or by making use of the payment services available on the Website.

5. Delivery

5.1. The Service shall take every effort to deliver at the date and time specified in the relevant Order, however delays in delivery may occur due to unforeseen circumstances that are no fault of the Service. The completed Model shall be delivered to the User at the Service's warehouse at: Novosibirsk, ul. Inzhenernaya, 20, or by any other means stated in the Frequently Asked Questions (FAQ) section of the Website(FAQ) (http://prototypster.ru/faq/).

5.2. The ownership of the Model transfers to the User upon delivery.

5.3. The Work deliverables are examined by the User when received at the Service's warehouse or from the carrier (if relevant delivery clause applies). No complaints regarding the deliveries of the Work will be accepted if made after that time.

6. Warranties and liability of the parties

6.1. The User warrants that the manufacture of the Model does not require a license or any other form of permit, that the manufactured Model is not subject to mandatory certification and that its subsequent release into general circulation and use will not constitute a breach of the law of Russia.

6.2. The User further warrants that the Layout loaded onto the Website does not contain any malicious software or information classified as state or commercial secret.

6.3. Notwithstanding any other provisions hereof, the User, as the owner of the Layout, expressly agrees to the Layout being used, including by the Service's contractors.

6.4. The Service makes no representations expressly contained in the Offer or on the Website as to whether the Model manufactured to the Order meets the requirements and expectations of the User, or is suitable for a particular purpose, or is free from design defects.

6.5. Either Party shall be relieved of liability for full or partial failure to fulfill its obligations hereunder if such failure has been caused by a force majeure event that occurred after this Agreement was signed and that the Parties could not have reasonably foreseen or prevented.

6.6. The liability of the Service hereunder shall in any event be limited to actual damage in an amount not exceeding the cost of Work that has been paid under the Agreement.

6.7. If, as a result of a breach of User's warranties, the performance of the Work under the Agreement gives rise to any complaints, claims and/or awards of damages (compensation) against the Service by third parties and/or government authorities, or to an administrative action, the User shall promptly at the Service's request provide to the Service all requested information relating to the matter in dispute. The User agrees to assist the Service in settling such claims and reimburse the Service for any losses (including litigation costs and penalties) incurred by the Service in connection with administrative charges brought against it, or as a result of such complaints, claims and awards being presented, considered and settled.

7. Acceptance of the Offer. Term and termination, amendments

7.1. To accept the Offer, the User will need to complete all of the steps below:
а) acknowledge acceptance of this Offer at
б) draw up and submit an Order on the Website;
в) make a prepayment for the Work in the amount shown on the Service's Website as at the date of payment;
This Offer may be the basis for an unlimited number of Agreements.

7.2. This Offer becomes effective once it is placed on the Website and remains in effect until withdrawn. The Service reserves the right to amend and/or withdraw this Offer any time at its sole discretion. The User shall be notified of any amendments to or withdrawal of the Offer by way of publishing the information on the Website or via a notice sent to the User's email specified during registration.

7.3. This Agreement comes into effect once the Offer is Accepted by the User and remains in full force and effect: а)until the Parties fully discharge their respective obligations hereunder; or b) unless terminated earlier.

7.4. If the User withdraws from the Agreement before the final Work deliverables are transferred, the Service is to be reimbursed for the full cost of Work completed as of the date of termination hereof, plus any expenses incurred in this relation.

8. Other provisions

8.1. This Agreement and the execution and performance hereof shall be governed by applicable legislation of Russia.

8.2. Any disputes arising between the Parties shall be settled out of court by way of negotiation; where the parties fail to resolve their differences, they shall refer the matter to a court in accordance with applicable legislation of Russia.

8.3. By accepting this Offer, the User gives his unlimited irrevocable written consent to process his personal data in any manner, including any action (operation) or a series of actions (operations) performed with or without the use of automation tools. This includes: collection, recording, classification, accumulation, storage, refinement (update, modification), retrieval, use, transfer (disclosure, dissemination, access), depersonalization, blocking, removal, destruction of personal data for the purposes of execution and performance of the Agreements.

8.4. Any notices to be given or made hereunder may be sent by one Party to another by email: а) to the email address of the User specified during registration, or b) to the email address of the Service (mail@prototypster.ru).

8.5. The Service may request additional information, such as xerox copies of identity documents and credit cards, should the need arise to check identity or prevent fraud.

8.6. If any of the provisions of this Agreement is held invalid, the remaining provisions hereof will remain in full force and effect.